Plastic Plate Die Head/Thick Board Die /Mould

FOB Referensi Harga:Dapatkan Harga Terbaru
US$500,00 - US$6.000,00 / Set | 1 Set/set (Min. Order)
laporan Aktivitas Yang Mencurigakan
ikhtisar
Rincian cepat
Tempat asal:
Hubei, China
Nama merek:
TJC-900
Nomor model:
TJC-900
Membentuk mode:
Cetakan Ekstrusi
Bahan produk:
Baja
Produk:
Produk Rumah Tangga
Material:
Steel
Kemampuan pasokan
Kemampuan pasokan:
30 Set/Sets per Month
Pengemasan & Pengiriman
Waktu Pemenuhan Pesanan: :
20-50days

Product

plate die

We often use A3,45#,3Cr17,3Cr13 stainless steel.If you have special requirement,you can tell us. 

And our products are authorized by the Quality Management System Certificate for ISO9001:2000.

Common finished product defects analysis

Product defects

Possible reasons

Handling methods

Extrusion mould distortion

Too short cooling time, not enough cooling for finished products

delay the cooling time

Too rapid speed for extrusion, forced pull to lead the distortion

Slow down the speed of extrusion die

Finished product structure with defects

Modify the dies

Too high temperature for die, poor cooling for finished products

reduce the mould temperature

Knit line

Insufficient injection pressure, too slow injection speed, too small gate and flowing pipe

Increase the injection pressure and injection speed, modify the gate and flowing pipe.

Too low forming temperature and mould temperature

Increase temperature, increase back pressure or accelerate the rotating speed of screw

Insufficient exhaust in interflow zone and no run-off pit

Fix exhausting holes in interflow zone and increase the number of run-off pits.

Use too much release agent

Reduce to use release agent

Poor luster of finished products

Too slow injection speed, insufficient pressure and low mould temperature

Increase the injection speed, injection pressure and mould temperature

Hydrosphere or grease pollution in the mould cavity

Clean it up

Poor grinding of mould surface or too small gate and flowing pipe

Modify mould

Insufficient injection quantity or water contained in the raw material

Increase the injection pressure and injection speed, delay the jetti

Cracks of extrusion mould of finished products

Too low temperature of material or mould

Increase the temperature

Insufficient stripping lean or improper extrusion way

Modify the mould

Too small gate

Modify the mould

Insufficient stripping angle

Modify the mould

Coarse surface of extruded finished products

Too low forming temperature

Increase the temperature, accelerate the rotating speed of screw

Too low mould temperature

Increase the mould temperature

Surface blocks of extruded finished products

Not clean material pipes, contain wastes

Clean up material pipe

The additive articles such as color master batch are not done according to the requirements

look for the corresponding color master batch

Insufficient extrusion quantity

Insufficient temperature for material pipe

Increase the temperature

Wastes in the gate or too low speed rate of screw

Clean up the gate or accelerate the rotating spped of screw

Extrusion mould expansion of extruded products

Too low temperature of mould head or too fast rotating speed of screw

Increase the mould head temperature and reduce the rotating speed of screw

  

Too fast limited material

Adjust the limited material device

Produce much gas when extruding

Too high melting temperature

Reduce the melting temperature

Wastes in the material pipe

Clean up the material pipe

Pits of extruded products

Water contained in the raw material

Dry the material

Too high meting temperature, too fast rotating speed of screw

Reduce the meting temperature, and the rotating speed of screw

 

Huangshi Jiarui Plastic Mould Co., Ltd. is a professional mould manufacturer, which mainly produces PVC/PE plastic moulds,such as plastic windows,door and pipe profile mould,WPC floor and fence mould and so on.Then our company is not only the member of China Plastics Processing Industry Association, but also the fixed production enterprise; we are also the member of the Ministry of Construction Metal Structure Association and Committee of Doors and Windows.

For moulds,we have ... View detail

View this Supplier's Website

Basic Information Indicates information has been verified onsite by a certification specialist

 Product/Service (We Sell):Plastics Mould  
 Brands:Jiarui  
 Number of Employees:51 - 100 People  

Trade & Market

 Main Markets:North America
South America
Southeast Asia
Africa
Oceania
Mid East
Eastern Asia
Central America
South Asia
 Total Annual Sales Volume:Below US$1 Million  
 Export Percentage:21% - 30%  

Factory Information

 Factory Size (Sq.meters):1,000-3,000 square meters  
 Number of Production Lines:Above 10  
 Number of R&D Staff:Less than 5 People  
 Number of QC Staff:Less than 5 People  
 Management Certification:ISO 9001:2000  
 Contract Manufacturing:OEM Service Offered   Design Service Offered   Buyer Label Offered  

Supplier Assessment Report

Do you want to know more about this company before you make a deal? Request an Assessment Report.
Supplier Assessment Reports are detailed on-line reports about the supplier's capabilities. It helps you get all the information you need to trade confidently with suppliers.

Request a Supplier Assessment Report

You can either send the default request below or compose your own request to the supplier.
 
 
anda Mungkin Ingin
tidak persis apa yang anda inginkan? 1 permintaan, beberapa kutipan mendapatkan Kutipan Sekarang >>
Hasil Pemasok atau Produk ini telah diterjemahkan secara otomatis untuk kenyamanan Anda dengan perangkat penerjemahan bahasa. Jika Anda menemukan masalah mengenai hasil terjemahan, saran Anda sangat kami hargai.
Semua informasi pemasok dan produk dalam bahasa selain dari bahasa Inggris yang ditampilkan di halaman ini adalah informasi dari www.alibaba.com yang diterjemahkan dengan alat penerjemahan bahasa otomatis. Jika Anda memiliki pertanyaan atau saran tentang kualitas terjemahan otomatis, silakan email kami di english.trans@service.alibaba.com. Penerjemahan adalah murni proses otomatis yang diselesaikan melalui sarana teknis. Alibaba.com tidak berpartisipasi dalam setiap proses penerjemahan, juga tidak mengetahui atau mengendalikan penerjemahan tersebut atau isi daftar komoditas. Alibaba.com dan afiliasinya dengan ini secara tegas menolak jaminan, langsung atau tersirat, dan bertanggung jawab atas kerugian apa pun yang timbul akibat dari atau mengandalkan informasi yang diterjemahkan otomatis atau disebabkan oleh kesalahan teknis perangkat penerjemahan bahasa.