Henan Machinary Joinrise ISO dan BV Bersertifikat Inclined Belt Conveyor

FOB Referensi Harga:Dapatkan Harga Terbaru
US$1.400,00 - US$30.000,00 / Unit | 1 Unit/unit (Min. Order)
Pengiriman:
Dukungan Angkutan laut
laporan Aktivitas Yang Mencurigakan
ikhtisar
Rincian cepat
Kondisi:
Baru
Tempat asal:
Henan, China
Nama merek:
Henan Joinrise
Nomor model:
Inclined belt conveyor
Bahan:
Stainless Steel
Tegangan:
220/380/660/1140/6000 V
Fitur bahan:
Tahan Panas
Sertifikasi:
Sertifikat ISO
Struktur:
Belt Conveyor
Jenis:
Slat Conveyor
Kapasitas beban:
<700 T/H
Dimensi (l * w * h):
Kustomisasi
Daya (w):
2.2 ~ 4000 kw
Lebar Sabuk:
800mm-1600mm
Memuat jarak:
50-3000 m
Cenderung Sudut:
20 &deg; ~ 32.5 &deg;
Tape kecepatan:
0.3 ~ 5 m/s atau disesuaikan
Motor/Reducer:
ABB/MENJAHIT/FLEND/SIEMENS
Cleaner tipe:
H atau P tipe atau disesuaikan
Cleaner bingkai:
Steel/karet atau disesuaikan
Warna:
Apple hijau atau disesuaikan
Emergency stop sistem:
Termasuk
Overload perangkat berhenti:
Termasuk
Kemampuan pasokan
Kemampuan pasokan:
50 Unit/Units per Month
Pengemasan & Pengiriman
Rincian Kemasan
Peralatan utama mengadopsi nude paket, mudah untuk kehilangan, teredam, kerusakan yang rusak akan dikemas dalam peti kayu atau papan komposit peti. Juga kami akan satify berbagai jenis paket gaya kebutuhan pelanggan
Pelabuhan
Tianjin/Qingdao/Shanghai
Waktu Pemenuhan Pesanan: :
within two weeks after receiving 30% advanced payment

Henan machinary Joinrise ISO and BV certified inclined belt conveyor  

Product Description

Steeply inclined belt conveyor Scope of application: 

This type of belt conveyor is applicable in continuous tilted transportation of bulk material in coal mine, port and coal washery. 

Steeply inclined belt conveyor Structural features: 

The actuator and unloading device both adopt detachable triangular or trapezoidal support, while the roller generally uses the high-intensity cast welding structure. The drive device mainly adopts frequency conversion soft start. Four to five carrier rollers are installed on each group of beams and steel cord belt with or without different patterns are used. This type of belt conveyor is installed with Safety protection device.

Steeply inclined belt conveyor Technical features: 

  • Bandwidth: 800 mm to 1600 mm 
  • Tilted angle: 20°~ 32.5°
  • Capacity: <700 t/h 
  • Electric power: 160 ~ 2×450 kw

Parameters of belt conveyor

 TD 75DTII(IIA)UndergroundStretchableInclinedSuspended
typeDTLDTLDTCDSJ DTG
belt width (mm)500-1400500-2000650-1600650-1600 800-1600650-1200
length (m)50-300050-300050-300050-3000 <1000
belt speed (m/s) 0.3-4 or customized 0.8-5 or customized dependsdependsdependsdepends
capacity  (t/h) 41-2996 69-4130 dependsdepends  <700200-1200
angle  °00 depends020-32.5<15
voltage  (V)220-6000220-6000220-6000220-6000220-6000220-6000
power  (KW) 1-180 or customized 2.2-315 or customizeddepends

22-3*560

or customized

 160-2*450

or customized

22-2*160

or customized

motor and reducerABB/SEW/SIEMENSABB/SEW/SIEMENSABB/SEW/SIEMENSABB/SEW/SIEMENSABB/SEW/ SIEMENSABB/SEW/SIEMENS
demensioncustomizedcustomizedcustomizedcustomizedcustomizedcustomized
materialStainless/carbon steel Stainless/carbon steel Stainless/carbon steel Stainless/carbon steel Stainless/carbon steel Stainless/carbon steel 
certificationISOISOISOISOISOISO
colourapple green customizedapple green customizedapple green customizedapple green customizedapple green customizedapple green  customized
emergency stop systemincludeincludeincludeincludeincludeinclude
belt typePhoenix / GoodyearPhoenix / GoodyearPhoenix / GoodyearPhoenix / GoodyearPhoenix / GoodyearPhoenix / Goodyear
filter belt centreing deviceincludeincludeincludeincludeincludeinclude
cleaner

rubber, alloy

rubber, alloyrubber, alloyrubber, alloyrubber, alloyrubber, alloy

H-frame I-type(landing leg) AND Intermediate Frame

It is part of the belt conveyor,welded by angle iron(U-steel),baseboard, pedestal,steel tube, shaped like an H. This part is used for supporting the intermediate frame and carrying the total weight of rubber belt and material. Normally, H-frame I-type and H-frame Ⅱ-type are used in rotation.
Intermediate frame is part of belt conveyor, used for installing cross beam of idler and the entire idler. Generally made of box iron or angle steel, it is fixed together with H-frame from below.Length:3~6 m.Specification of box steel and angle steel varies with different breadth of belt conveyor.as follows:

<63  <75  [10  [12

               [14   [16 

Transmission drum:

Transmission drum,shaped like a cylindrical canister,is the most important component of belt conveyor.Linked with the actuating device,transmission drum is used to transmit power of conveyor.Watt level depents on the friction coefficient and wrap angle between the surface of transmission drum and conveyor belt.Transmission drum mainly consists of coiling block, axle, bearing and bearing pedestal.Generally, patterns of rhombus and herringbone are added to the surface of transmission drum casted with rubber for the purpose of increasing friction and discharging adhesive material.Transmission drum is linked with axle by chain or taper-lock.The material of the surface of transmission drum is polyurethane rubber or ceramics.Coiling block of transmission drum of heavy type uses cast-weld structure.

 

Company Information

Welcome to Joinrise

Henan Joinrise Mining Equipments Manufacture Co.,Ltd

Henan Joinrise Mining Equipments Manufacture Co.,Ltd is located in Wen County,the birthplace of Chen Style Tai’Chi.It is a national Class II monitoring enterprise,and a fixed-point production facility for the original China Coal Mining Machinery Industrial Department.The company is one of the first organizations to be awarded the national Safety Sign Approval Certification.It has passed ISO9001 International Quality System Certification,acquired the Industrial Products Manufacturing License.The Joinrise Brand belt conveyor,as manufactured by the company,was rated as a famous brand-name product of Henan Province in 2011.

More than 170 kinds of belt conveyors, of various specifications and models, have successfully passed the National Coal Mine Safety Certification standards procedure. The major products include TD75, DTII, DTII(A) type and various other kinds of coal mine belt conveyors what offer the functions of upward transport, a large dip angle of 32.5 degree, downward transport of 18 degree, bending within 12 degree and belt width from 500 to 2,000mm.

View more

OFFICE

WELCOME TO OUR FACTORY!

MEASURING ROOM AND LABORATORY

HONOUR AND CERTIFICATION

 

anda Mungkin Ingin
tidak persis apa yang anda inginkan? 1 permintaan, beberapa kutipan mendapatkan Kutipan Sekarang >>
anda Mungkin Ingin
Hasil Pemasok atau Produk ini telah diterjemahkan secara otomatis untuk kenyamanan Anda dengan perangkat penerjemahan bahasa. Jika Anda menemukan masalah mengenai hasil terjemahan, saran Anda sangat kami hargai.
Semua informasi pemasok dan produk dalam bahasa selain dari bahasa Inggris yang ditampilkan di halaman ini adalah informasi dari www.alibaba.com yang diterjemahkan dengan alat penerjemahan bahasa otomatis. Jika Anda memiliki pertanyaan atau saran tentang kualitas terjemahan otomatis, silakan email kami di english.trans@service.alibaba.com. Penerjemahan adalah murni proses otomatis yang diselesaikan melalui sarana teknis. Alibaba.com tidak berpartisipasi dalam setiap proses penerjemahan, juga tidak mengetahui atau mengendalikan penerjemahan tersebut atau isi daftar komoditas. Alibaba.com dan afiliasinya dengan ini secara tegas menolak jaminan, langsung atau tersirat, dan bertanggung jawab atas kerugian apa pun yang timbul akibat dari atau mengandalkan informasi yang diterjemahkan otomatis atau disebabkan oleh kesalahan teknis perangkat penerjemahan bahasa.